Menu
Your Cart

All stuff which we are selling is used.

TSL MDU14-CO Dual Input Auto Changeover 14 Output Mains Distribution Unit

TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL	MAINS POWER MANAGEMENT UNIT	MDU 14-CO
TSL MDU14-CO Dual Input Auto Changeover 14 Output Mains Distribution Unit
$340.00
  • Stock: 30
  • Code: BS16850
  • Model: MDU 14-CO

TSL MDU14-CO Dual Input Auto Changeover 14 Output Mains Distribution Unit


The TSL MDU14-CO is a dual power input 14 output power distribution unit intended for racks where equipment needs a constant uninterrupted power supply. The 2 input power supplies go to a set of master changeover relays with control circuitry to detect power presence. In the event of a failure of the input in use the unit seamlessly will switch over to the backup supply within 50ms so no equipment is affected by the change. There is no load taken from the backup supply when not in use. From the relays the power is fed to a double pole mains switch/circuit breaker on the front panel which feeds the 14 outputs. Each rear IEC output is fed via a front panel fuse with Green LED indicator showing condition of the fuse. The unit has Master or slave control capability so that when the master power is restored the unit will switch back to the original source. This ensures that any backup power source isn’t used unnecessarily. 



Technical Details

Features

 

• 19" 1RU.

• 14 Fused IEC outlets with green power good LEDs.

• Dual Input Seamless Auto Changeover

• LED Indication

• A/B Tri colour Master/Slave Indicators

• Power - Blue - Power applied to the unit.

• Green A, B, & Remote Master Control indication.

This 1RU unit is designed to fit into a rack in any position. The inlets are via 2 Neutrik Powercon NAC3FCA connectors. 2 free cable mounted connectors are supplied with each unit. Output power to the 14 IEC outlets is via the switch fitted to the front panel. Each outlet is fused on the front panel with a 10A HCT fuse. A green power LED adjacent to each numbered fuse indicates the status of each fuse: Green good; Off – Failed.