Tieline TLM600 i-Mix G3 5 Channel Remote Codec - IP & POTS Standard
Tieline i-Mix G3 is the worlds most advanced IP codec for radio and Television, combining six essential live remote broadcast products into one lightweight 16" x 9" box, replacing tens of thousands of dollars of expensive equipment.
Broadcasting with the i-Mix is like having an entire remote truck in a single box. Designed by radio and television sports broadcasting specialists, it is ideal for sports broadcasts, talk shows, music and other live events. It is a multi-faceted unit that can be used as a mixer, a commentary control unit and a codec. It integrates bi-directional audio and full-duplex communications with extensive remote control capabilities to reduce setup time, on-site personnel, wiring requirements and signal distribution costs.
Tieline i-Mix IP codecs feature a LAN connection, one built-in POTS codec and an analog telephone coupler. You can increase your programming, mixing and communications options by using the codec module slot to send high quality, low-delay live audio over 3G/4G, a second POTS/PSTN analog phone line, ISDN, X.21, GSM or B-GAN satellite networks.
In comparison with the field unit Commander G3, the i-Mix has additional balanced inputs, an onboard PA control, dedicated Cue/Comms buttons for communications and a telephone coupler for managing live talkback callers.
Onboard POTS/PSTN and your choice of IP, 3/4G, POTS/PSTN, ISDN, GSM, X.21 and B-GAN satellite using a plug-in module.
A suite of algorithms to suit all your live broadcasting requirements including Tieline's famous Music, MusicPLUS and Voice G3* algorithms - as well as industry standards such as G.711, G.722 and MPEG Layer II.
Tieline's loss-tolerant MusicPLUS algorithm provides up to 20 kHz stereo audio quality with 20ms coding delay at bit rates as low as 96kbps - making it ideal for today's IP and 3G/4G networks.
Tieline Music can deliver up to 15 kHz FM quality mono audio at bit-rates as low as 24kbps, with only 20 milliseconds encoding delay.
Tieline Voice G3* is optimized to deliver up to 7.5 kHz quality audio at bit-rates as low as 9.6 kbps.
A configurable 16 x 8 cross-point Digital Matrix Audio Router (DMR) for customizing your cue, intercom, talkback and audio routing and send any audio input to any audio output.
Comprehensive and configurable communications facility for local and full-duplex studio-to-remote communications.
Pre-configured and adjustable mono, stereo, mono/IFB and dual mono connection profiles.
A telephone coupler for taking live callers in the field.
On-board relay and RS-232 control system for local and remote control of equipment at either end of your codec link
Full control of a remote announcer's audio input levels from the studio.
Free Tieline Toolbox PC software configuration and control software, offering configuration, audio routing and input control of your local and remote codec.
Automatic connection failover.
|Analog Audio Specifications|
|Audio Inputs||5x Female XLR and 1 x RCA Aux|
|Audio Outputs||2x Male XLR and 1 x RCA Aux|
|Headphones||4 x 6.5mm (1/4") Jacks|
|A/D & D/A Converters||24 bit sigma-delta|
|POTS Sample Frequencies||16kHz, 32kHz|
|ISDN Sample Frequencies||16kHz, 24kHz, 32kHz, 48kHz|
|X.21/V.35 Sample Frequencies||16kHz, 24kHz, 32kHz, 48kHz|
|GSM Sample Frequencies||16kHz, 32kHz|
|IP Sample Frequencies||16kHz, 32kHz|
|3G Sample Frequencies||16kHz, 32kHz|
|Audio Input Impedance||High Impedance - > 5K ohm|
|Output Impedance||50 ohm Balanced|
|Clipping Level||+18dBu (input and outputs)|
|Frequency Response||20 Hz - 15kHz over POTS/GSM. 20Hz - 20kHz over ISDN. 20Hz - 23kHz over IP|
|Total Harmonic Distortion||<0.01% at +4dBu|
|Signal To Noise Ratio||Typically 84dB at +4dBu|
|POTS||Tieline Music, MusicPLUS, Voice G3* and Uncompressed audio|
|ISDN||G.711, G.722, MPEG Layer 2, MPEG, Tieline Music, Tieline Music Plus|
|GSM||Tieline Music & Tieline Voice G3*|
|X.21||G.711, G.722, MPEG Layer 2, Tieline Music, Tieline MusicPLUS|
|IP||G.711, G.722, MPEG Layer 2, PCM, Tieline Music, Tieline Music Plus and Tieline Voice G3*|
|3G/4G||G.711, G.722, MPEG Layer 2, Tieline Music, Tieline Music Plus and Tieline Voice G3*|
|4G-LTE||Two versions available supporting different wireless networks globally. Accepts full sized SIM cards.|
|4G USB||USB module for connecting compatible 4G-LTE modems|
|3G||Global dedicated 3G module featuring GSM/UMTS/HSDPA wireless networks.|
|IP Ethernet port||TCP/UDP, SIP, over LAN, WAN, open internet.|
|ISDN||Basic Rate S/T or U modules with up to 2 B channels supported per module with RJ45 interface|
|POTS/PSTN/Analogue Telephone||Onboard POTS RJ11 connection or POTS Modem module with RJ11 connector|
|GSM||HSCSD 14,400 to 28,800bps and CSD 9600bps (requires SIM card)|
|X.21||DB15 male connector. Up to 384KBits/S Compressed, up to 2 MB Uncompressed|
|Satellite||External BGAN or Inmarsat Satellite phone can be connected to the ISDN module or IP LAN port|
|Data and Control Interfaces|
|USB Slave||USB-1.1 slave|
|LAN||10/100 base T RJ45 connector|
|Serial||RS232 up to 115kbps with or without CTS/RTS flow control Female DB9 Connector|
|RS232||Data interface port can be used as a proprietary data channel|
|CAN||Differential CAN, 6 pin female DIN connector|
|Display||4 x 20 line LCD|
|Level Indicators||2 x 10 level LEDs with configurable source|
|Channel On/Off||Volume controlled and matrix router configurable|
|Cue/intercom||Matrix router configurable|
|Headphone Monitoring||Volume controlled for each channel|
|Send Return Mix||Switch between audio send/return or a mix of both|
|GPIO Relay Controls|
|Inputs||2 x Inputs: Contact Closure to ground with internal 5v feed at 5mA 0.15" pitch male pheonix connectors. (12V power connector has two relay inputs for power sensing one independent and 1 duplicated with phoenix connector)|
|Outputs||2x Outputs: floating solid state switching 48V 100mA|
|Relay Expansion||Expandable to 8 in and 8 out using optional CAN 8+8 product.|