Tieline commander 3G ISDN/IP broadcast audio codec








- Stock: 2
- Code: BS17169
- Model: TLR303
The 2RU Commander features two balanced XLR inputs with both front and rear panel headphone outputs and mic inputs. It also has four front panel PPM meters that can display send, return or selected channel audio levels. The screen features real time link information and all controls are available at a touch of a button, or they can be locked out.
The Commander 2RU features two balanced XLR inputs with both front and rear panel headphone outputs and mic inputs. It includes four front panel PPM meters that can display send, return or selected channel audio levels. The screen features real time link information and all controls are available at a touch of a button, or they can be locked out
Tieline Commander G3 IP codecs are amongst the world's most successful and widely used codecs for remote broadcasts, studio-to-transmitter links and audio contribution. The new TLR300B Commander G3 is a 2RU studio codec with comprehensive front panel hardware controls.
All Commander G3 codecs are EBU N/ACIP Tech 3326 compatible over IP and the company is committed to developing new IP and 3GIP applications that take advantage of emerging network infrastructures around the globe.
Digital AES/EBU Inputs = Unsurpassed Audio Quality
Commander G3 IP codecs offer a choice between analog or digital input modules - so now you can capture crystal clear digital audio and keep it in the digital domain using Tieline's AES/EBU input/output modules.
You can choose either an analog two input/output card with XLR connectors or an AES/EBU two input/output card on XLR connectors. AES/EBU clock choices include internal clock, external AES/EBU clock and external word clock. Tieline has also implemented an automatic failover from the selected external clock to the internal clock in the event of an external clock failure.
When purchasing any TLR300B codec you can choose any single input/output card and it will be included in the price of the codec (i.e. there will be no additional cost to the rack-mount price for the first card you choose).
1. Analogue 2 in 2 out interface (Part No: TLANA2IN2OUT)
Analog input card for Rack Mount Codec- Analog Commander Rack Mount codec input card. Featuring 2 input and 2 output on XLR connectors plus balanced Aux in/out on 6.35mm (1/4") jack. Balanced Aux out may also be used as a headphone out.
2. AES EBU 3ID interface (Part No: TLAESEBU3ID)
Digital Input Card for Rack Mount Codec:- AES/EBU Digital Card with 2 in and 2 out balanced AES3 on (XLR) plus unbalanced (BNC) AES3 (jumper selectable) with unbalanced word clock input as AES3 output sync reference.
Redundancy through Automatic failover
This powerful software option provides automatic switching from one network to another in the event of a link failure. For example, if your IP link fails it can automatically switch to a backup POTS, ISDN or 3G link. This provides great peace of mind for studio-to-transmitter links and live remote broadcasts in particular.
Flexible Connections and Control
All Commander IP codecs feature serial, USB and LAN interfaces. Two GPIO relay control inputs and two outputs (expandable to 8 using the optional Tieline CAN8+8 relay box) offer a variety of internal audio matrix routing and external machine controls. Front panel hotkeys can be programmed to trigger relay and routing state changes, or external relay devices can be interfaced to trigger machine control at either end of your link. RS-232 or raw control data can also be sent via the codec serial port and delivered to the other end of your codec link for external machine control.
Commander G3 is still the only codec to enable control of remote codec audio inputs from the studio, so your announcers no longer have to worry about understanding correct audio input levels. You can control one remote audio input or gang all remote audio inputs to a single control in the studio.
Never before have so many powerful remote broadcast elements come together in one compact box. Contact Tieline now for a free demo and see what everyone else is talking about.
Technical Details
.
Specifications
| Analogue Audio Specifications | |
|---|---|
| Analog Audio Input card - (optional card) | 2x Female XLR and 1 x 6.35mm (1/4 inch) jack Aux balanced |
| Analog Audio Outputs - (optional card) | 2x Male XLR and 1 x 6.35mm (1/4 inch) jack Aux balanced |
| AES/EBU Audio card - optional 1 | 1 x stereo Female XLR input and 1 Stereo Male output with Word Clock on BNC |
| AES/EBU Audio Card - optional 2 | 1 x stereo Female XLR input and 1 Stereo Male output with STR Ref Clock |
| Headphones - on all card options | 1 x 6.5mm (1/4") Jack at rear shared with Aux out |
| Audio Input Impedance | High Impedance - > 5K ohm |
| Output Impedance | 50 ohm Balanced |
| Clipping Level | +18dBu (input and outputs) |
| Frequency Response | 20 Hz to 15kHz over POTS/GSM and 20Hz to 20kHZ over ISDN |
| Total Harmonic Distortion | <0.01% at +4dBu |
| Signal To Noise Ratio | Better than 84dB at +4dBu |
| Sample Frequencies | |
| A/D & D/A Converters 24 bit Sigma-Delta | |
| IP Sample Frequencies | 16kHz, 24kHz, 32kHz, 48kHz |
| 3G Sample Frequencies | 16kHz, 24kHz, 32kHz, 48kHz |
| POTS Sample Frequencies | 16kHz, 32kHz |
| ISDN Sample Frequencies | 16kHz, 24kHz, 32kHz, 48kHz |
| X.21/V.35 Sample Frequencies | 16kHz, 24kHz, 32kHz, 48kHz |
| X.21/V.35 Data interfaces | Up to 384KBits/S |
| GSM Sample Frequencies | 16kHz, 32kHz |
| Compression Algorithms | |
| POTS | Tieline Music, MusicPLUS, Voice G3* and Uncompressed audio |
| ISDN | G.711, G.722, MPEG Layer 2, Tieline Music, Tieline Music Plus |
| GSM | Tieline Music & Tieline Voice G3* |
| X.21 | G.711, G.722, MPEG Layer 2, Tieline Music, Tieline Music Plus |
| IP | G.711, G.722, MPEG Layer 2, PCM, Tieline Music, Tieline Music Plus and Tieline Voice G3* |
| 3G/4G | G.711, G.722, MPEG Layer 2, Tieline Music, Tieline Music Plus and Tieline Voice G3* |
| Module Interfaces | |
| 4G-LTE | Two versions available supporting different wireless networks globally. Accepts full sized SIM cards. |
| 4G USB | USB module for connecting compatible 4G-LTE modems |
| 3G - (Software module) | 3G GSM/UMTS/HSDPA/HSUPA or EVDO Rev 0/Rev A internal cards available or broadband cell phone via Tieline USB master module. |
| IP Ethernet port | TCP/UDP, SIP, over LAN, WAN, open internet |
| ISDN | Basic Rate S/T or U modules with up to 2 B channels supported per module with RJ45 interface |
| POTS/PSTN/Analogue Telephone | POTS Modem module with RJ11 connector |
| GSM | HSCSD 14,400 to 28,800bps and CSD 9600bps (requires sim card) |
| X.21 | DB15 male connector |
| Satellite | External BGAN or Inmarsat Satellite phone can be connected to the ISDN module or IP LAN port |
| Data and Control Interfaces | |
| USB Slave | USB-1.1 slave |
| LAN | 10/100 base T RJ45 connector |
| Serial | RS232 up to 115kbps with or without CTS/RTS flow control Female DB9 Connector |
| RS232 | Data interface port can be used as a proprietary data channel |
| CAN | Differential CAN, 6 pin female DIN connector |
| Front Panel Interface | |
| 2 RU Rackmount | Keypad 20 Key |
| Display | 4 x 20 line LCD |
| Display | 4 x configurable Tx and Rx indicator LCDs |
| Level indicators | 4 x 8 level LEDs. Configurable source with selector button. |
| Channel On/Off | On/Off, Gain controlled and matrix router configurable |
| Cue/Intercom | Matrix Router configurable |
| Microphone Input | 1 x 6.35mm (1/4inch) jack Aux balanced |
| Headphone Monitoring | 1 x 6.35mm (1/4inch) shared with Aux out with volume and mix adjustment |
| Send Return Mix | Mix between audio send/return or a mix of both |
| 4 x Programmable hotkeys | Matrix router configurable |
| Send Return Mix | Switch between audio send/return or a mix of both |
| GPIO Relay Controls | |
| Inputs | 2 x Inputs: Contact Closure to ground with internal 5v feed at 5mA 0.15" pitch male pheonix connectors. (12V power connector has two relay inputs for power sensing one independent and 1 duplicated with phoenix connector) |
| Outputs | 2x Outputs: floating solid state switching 48V 100mA |
| Relay Expansion | Expandable to 8 in and 8 out using optional CAN 8+8 product. |
| General | |
| Operating Temperature | 5°C to 45°C (40°F to 115°F) |
| Power | 90-250V AC, Auto-sensing 3 pin IEC connector |






















Online