-300x225.png "Audio Video Patch Panels")
-64x64w.jpg "Trilogy")
symetrix symnet edge
- Stock: 2
- Code: BS17600
- Model: symnet edge
Edge scalable hardware partners with Composer open architecture software for total design synergy. Networked audio connections use Dante protocol for ultra low latency. Multiple end user control options complete the system.
Features:
Four configurable I/O card slots, up to 16 channels total of local I/O plus 128 (64x64) channels of Dante network audio.
Eight logic inputs (or four analog control inputs) and eight logic outputs.
Redundant Dante network audio ports on an internal gigabit switch eliminates the need for an external switch in many systems. Systems using 10 or more Edge mainframes and/or mainframes separated by distances over 100 meters can be implemented with off-the-shelf gigabit hardware.
Ethernet for configuration and control, and RS-232 for third-party control systems.
User control by Symetrix ARC wall panels, ARC-WEB, SymVue, third-party touch screens.
Port for optional redundant external power supply.
Technical Details
| Space Required | 1U (WDH: 18.91 in x 9.5 in x 1.72 in / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections. |
| Electrical | 100-240 VAC, 50/60 Hz, 45 Watts maximum universal input and/or suitable 24 VDC / 2.0 Amp auxillary power source. No line voltage switching required. |
| Ventilation | Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc. |
| Shipping Weight | 13 lbs. (5.9 kg). |
| Certifications or Compliance | UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS. |
| Processors | 1 x Analog Devices SHARC 21489 @ 400 MHz SIMD. |
| Raw processing capacity | 400 MIPS, 1.6 GFLOPS. |
| Sampling Rate | 48 kHz, ± 100 ppm. |
| Frequency Response (A/D/A) | 20 Hz – 20 kHz, ± 0.5 dB. |
| Dynamic Range (A/D/A) | > 114 dB, A-weighted. |
| Channel Separation (A/D/A) | > 108 dB @ 1 kHz, +24 dBu. |
| Latency (A/D/A) | 0.88 mS, inputs routed to outputs. |
| Delay memory | 174 mono seconds per Edge frame. |
| Analog control inputs | 0-3.3 VDC. |
| Recommended external control potentiometer | 10k Ohm, linear. |
| Logic outputs | Low (0V) when active, pulled high (5V) when inactive. |
| Logic output maximum external power supply voltage | 24 VDC. |
| Logic output maximum external power supply current sinking | 50 mA. |
| Logic output maximum output current | 10 mA. |
| RS-232 accessory serial I/O | 38.4 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight-through, only pins 2, 3, and 5 required. |
| RS-485 serial I/O | 38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port. |
| Ethernet Cable | Standard CAT5, maximum device to device length = 100 meters. |
| Dante Cable | Standard CAT6, maximum device to device length = 100 meters. |
| ARC Cable | Standard CAT5, distance dependent upon load and number of devices |
| Maximum devices per system | 32 units per Site File. |
| Maximum stored presets | 1000. |
Online