Menu
Your Cart

All stuff which we are selling is used.

Sony VHS S-VHS playback Editing

Sony VHS S-VHS playback Editing
Sony VHS S-VHS playback Editing
Sony VHS S-VHS playback Editing
Sony VHS S-VHS playback Editing
Hot Out Of Stock
Sony VHS S-VHS playback Editing
Sony VHS S-VHS playback Editing
Sony VHS S-VHS playback Editing
Sony VHS S-VHS playback Editing
Sony VHS S-VHS playback Editing
$350.00
  • Stock: Out Of Stock
  • Code: BS16089
  • Model: SVP-5600

Model Details

S-VHS Editing Player.Built-in TBC, TC reader (LTC/VITC) and RS-422A interface.



Features:

Built-in Time Base Corrector

Chroma Process Improvement

Four Channel Audio Playback System

Frame Accurate Editing

Built-in SMPTE Time Code Reader

S-video Signal Output (4-pin DIN)

Component signal output (option)

A TBC is essential in such system applications as A/B roll editing to eliminate VTR jitter and for the proper adjustment of phase difference. Featuring 4fsc sampling and 8-bit quantization, this TBC offers superior picture quality without any additional time base correction.

This makes a chroma edge sharper and greatly improves the chroma band width, thus enabling sharper and clearer color picture reproduction.

Two channels use Hi-Fi tracks and two use normal longitudinal tracks. The Hi-Fi mode provides a superb 90dB dynamic range and a wide frequency response for high quality sound reproduction. XLR type connectors are used for all four channels, allowing direct connection to professional audio products.

In both assemble and insert editing modes precise, frame accurate video editing is possible. This is achieved by a sophisticated servo system, an improved quick response mechanism and built-in LTC/VITC time code capability.

Time code is indispensable for precise, frame accurate editing. The reading of SMPTE standard LTC and VITC is built into the SVP-5600.

S-Video Out connectors carries separate Y and C signals. This reduces picture deterioration due to cross color and dot interference during signal transmission.

Power requirements: AC120V, 60Hz, 3 wire grounded receptacle

Power consumption: 53W

Operating temperature: 5 to 40C(41 to 104F)

Tape speed: 33.35mm/s

Video signal: NTSC (color) EIA(monochrome)

S/N ratio: More than 47dB(in S-VHS/VHS mode)

Horizontal resolution: S-VHS: More than 400TV linesVHS: More than 240TV lines

Frequency response: Normal:50Hz to 12kHzHi-Fi: 20Hz to 20kHz

Tape format: S-VHS or VHS

Input: REF VIDEO IN (BNCX2,loop-through): Black burst or 1.0Vp-p,75,unbalanced,sync negative

Outputs: COMPOSITE OUT(BNC): 1.Ovp-p, 75, unbalanced, sync negativeS-VIDEO OUT(Mini DIN 4-pinx2):Y;1.0Vp-p,75,unbalanced,sync negativeC;0.286Vp-p(burst),75, unbalancedCOMPONENT OUT(BNCX3,with optional SVBK-170):Y;1.0Vp-p, 75 unbalanced, sync negativeR-Y;0.7Vp-p,75 unbalancedB-Y;0.7Vp-p,75,unbalancedVIDEO MONITOR OUT(Super) (BNC):1.0Vp-p, 75, unbalanced, sync negative

Dynamic range: More than 90dB(in Hi-Fi mode)

TBC REMOTE: 15-pin multi

REMOTE: 9-pin multi, SMPTE RS-422A standards

WIRED SIRCS: Control-S(Power supplied type)

FFWD and REW time: Approx. 2.5min.(with T-120)

Search speed(with optional SVRM-100): SHUTTLE:STILL,1/30, 1/10, 1/5, 1/2, 1, 2, 10 times normal speed , forward and reverse JOG: Frame by frame, forward and reverse.

Outputs(0dBu=0.775Vrms): Normal CH-1/2(XLR):+4/0/6dBm selectable at 600 load, low impedance, balanced HI-FI CH-1/2(XLR): + 40/-6dBm selectable at 600 load,low impedance ,balancedAUDIO MONITOR OUT(PIN):-5dBu,at 47k load, unbalancedHEADPHONE OUT (STEREO PHONE): -50 t0 -18dBu at 8 load unbalanced

S/N ratio (Normal audio at 3% distortion, Dolby OFF):: More than 43dB

TIME CODE OUT(BNC): 0dBu3dB at 10k load, unbalanced(0sBu=1.55Vp-p Pulse)

Technical Details

Features:

Built-in Time Base Corrector

Chroma Process Improvement

Four Channel Audio Playback System

Frame Accurate Editing

Built-in SMPTE Time Code Reader

S-video Signal Output (4-pin DIN)

Component signal output (option)