SONY LMD-2050W 20-inch Widescreen Multi-format LCD Monitor

Sony 20-inch Widescreen Multi-format LCD Monitor LMD-2050W

Features

• WFM and Audio* Level Meter Windows * Only embedded audio is supported. 

• Picture by Picture mode 

• H/V Delay Function 

• ACC Off 

• DC Operation 

• Setup Level for Analogue Component and NTSC signals 

• Sub Control buttons for adjusting Contrast, Chroma, Phase and Brightness 

• Blue-Only Mode 

• Monochrome Mode 

• Auto Chroma/Phase Setup 

• Remote (Ethernet, RS-232C, Parallel Remote) 

• DVI-D Input 

• Power-saving Function (computer input only) 

• DCC-2B

Specifications

Type A-Si TFT Active Matrix LCD

Resolution 1680 x1050 pixels (WSXGA+)

Picture Size (H x W) (Viewable area) (Diagonal) Approx. 433.5 x 272.9 mm

(Approx. 17 1/8 x 10 3/4 inches)

Approx. 511.1 mm (20 1/8 inches)

Aspect 16:10

colours Approx 16,777,216 colours (8bits)

Viewing Angle 89°/89°/89°/89° (typical) (up/down/left/right contrast>10:1)

Composite BNC x 1, 1.0 VP-p ±3dB sync negative

Y/C 4pin Mini DIN x 1

Y: 1.0 Vp-p ± 3dB sync negative

C: 0.286 Vp-p ± 3dB (NTSC burst signal level), 0.3 Vp-p ± 3dB (PAL burst signal level)

RGB, Component BNC x 3

RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)

Component : 0.7 Vp-p ± 3dB (75% chrominance standard colour bar signal)

External Sync BNC x 1

0.3 to 4.0 Vp-p ± bipolarity ternary or negative polarity binary

Audio RCA pin x 2 (L, R) -5 dBu 47 k ohms or higher

HD15 D-sub 15 pin x 1

R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)

Sync : Total level (polarity free, H/V separate and composite sync)

Plug & Play function : corresponds to DDC-2B

DVI TMDS signal link

Parallel remote Modular connector 8 pin x 1 (pin assignment at users' allocation)

Serial remote (LAN) D-sub 9-pin (RS232C) x 1

RJ-45 modular connector (ETHERNET) x 1 (10BASE-T/100BASE-TX)

DC in XLR type 4pin x 1 DC24V (output impedance 0.005 ohms or less)

Optional Option input slot, 2 slots (for HD-SDI, SDI capability and extra analogue I/O's)

Composite BNC x 1, 1.0 VP-p ±3dB sync negative

Y/C 4pin Mini DIN x 1 

Y: 1.0 Vp-p ± 3dB sync negative

C: 0.286 Vp-p ± 3dB (NTSC burst signal level), 0.3 Vp-p ± 3dB (PAL burst signal level)

RGB, Component BNC x 3

RGB : 0.7 Vp-p ± 3dB (Sync On Green, 0.3 Vp-p sync negative)

Component : 0.7 Vp-p ± 3dB (75% chrominance standard colour bar signal)

Storage & Transport Humidity 0 to 90 %

Operating/Storage/Trans. Pressure 700 to 1060 hPa

Dimensions (W x H x D) Dimension 518.5 x 468.4 x 269.9 mm (20 1/2 x 18 1/2 x 10 3/4 inch) Dimension without stand 518.5 x 328.7 x 104.7 mm (20 1/2 x 13 x 4 1/8 inch)

Display Stand (W x H x D) 320.0 x 361.5 x 269.9 mm (12 5/8 x 14 1/4 x 10 3/4 inches)

Mass With two option boards Approx. 10.5 kg ( 23 lb 2 oz) with BKM-229X x 2 Without option boards Approx. 10.1 kg ( 22 lb 4 oz)

Power Requirement AC100V to 240V 50/60Hz 0.4A to 0.8A, DC24V 3.3A

Power Consumption Maximum Approx. 95 W (with 2 x BKM-229X)

Operating Temperature 0 to 35 °C (recommended operation temperature 20 to 30 °C)

Operating Humidity 30 to 85% (No condensation)

Storage & Transport Temperature -20 to 60 °C

AC power cord

Table stand