Miranda ENC-1103 10-Bit composite to SDI decoder ENC-1103-SRP








- Stock: 1
- Code: BS20359
- Model: ENC-1103
Miranda ENC-1103 10-Bit composite to SDI decoder ENC-1103-SRP
The ENC-1103 is a high-quality encoder with 12-bit conversion allowing operators to convert a SDI signal to Composite, CAV or RGB. The composite outputs can be NTSC, PAL or PAL-M and the component outputs can be SMPTE, BETACAM or GBR formats. With its on-board Genlock and Video Proc-Amp, the card provides flexible system integration. An optional Frame Sync provides infinite timing adjustment relative to an external reference.
When embedded
audio is required to be separated into discrete channels, the built-in audio
demux (24-bit) allows up to 8 channels (2 groups) to be passed to an audio
card. New technology includes thumbnail generation and an optional
Waveform/Vectorscope over IP of the output signal which allows operators to
control and see the changes made to the signal.
This card operates with the MSB-1121 Monitoring Switching
Bridge which allows the output of any module in the Densité frame to be
monitored
Technical Details
- SDI isolated input w/active loop-through
- External reference input w/passive loop-through
- Up to six (6) Composite / two (2) CAV analog video outputs
- 12-bit D to A video conversion
- Line comb pre-filter selection for NTSC
- Video processing controls
- Hot-switch detection and handling
- Frame Sync Option provides timing, full phasing and freeze
modes
- Thumbnail Generation
- Waveform/Vector over IP option (operates with iControl)
- Provides output to Monitoring Switching Bridge option (MSB-1121)
- De-embedding of 8
channels (2 groups) of audio to a linked audio card (ex: UAP-1781)