Leitch Standard Serial Digital Video Distribution Amplifier VSD6800+

The VSD6800+ is a serial digital video distribution amplifier which supports SMPTE 259M & 344M, 143-540Mb/s.

Features:

• The VSD6800+ is a serial digital video distribution amplifier with cable equalizing
• The VSD6800+ features high video performance, low cost, remote control, and diagnostic capability in Leitch's control system
• The DA can distribute any 10 - 540Mb/s data within the amplitude limitation
• You can set up, control, and monitor the VSD6800+ either locally via card-edge jumper or remotely on a PC. For remote control, you can use either a serial RS-232 or optional ICE6800+ Ethernet connection
• Other VSD6800+ features include the following: Input signal presence detect, Automatic cable equalization, Alarm output

Specifications:

• Input - Signal type : SDI, ASI
• Input - Connector : BNC (IEC169-8)
• Input - Impedance : 75 ohm
• Input - Return Loss : >18 dB 5 MHz to 540 MHz
• Input - Maximum signal : 0.88 V
• Input - Cable equalization SDI 270 Mb/s : 0 ? 984 ft (0 ? 300 m) Belden 1694A or equivalent
• Output - Number of outputs : SDI 8, ASI 4
• Output - Signal type : SDI, ASI
• Output - Connector : BNC (IEC169-8)
• Output - Impedance : 75 ohm
• Output - Return Loss : >18 dB 5 MHz to 540 MHz
• Output - Signal Amplitude : 800 mV ? 10%
• Output - DC offset : 0.0 V ? 0.5 V
• Output - Rise and fall time : 400 to 700 ps
• Output - Overshoot : <10 %
• Performance - Jitter : < 0.2 UI
• Performance - Propagation : < 12.0 ns
• Performance - Power : 3.5 W
• Temperature - Performance : 5 ? 40 Degree C (41? 104 Degree F)
• Temperature - Operating : 0 ? 50 Degree C (32 ? 122 Degree F)