Leitch ARG6800+ Audio Gain Distribution Amplifier

 
  • $105.00

 
Quantity:
 
 
  • Brand: LEITCH
  • Model Number: ARG6800+
  • Product Code: BS16882
  • Availability: In Stock
  Usually dispatched in 2-4 working days
 
 

ARG-6800+ Audio Remote Gain Amplifier is a high performance amplifier that offers remotely controlled audio gain that can be increased for specific applications. Control is selectable to either remote or local. Flat frequency response, carefully controlled roll-off and very low distortion ensure a virtually transparent transmission path.


Features:

  • Balanced inputs and outputs
  • Remote control for mute settings
  • Remote indication for channel state and overload
  • Remote and local control for independent channel gain adjustment
  • Local control for selecting output configuration
  • Configurable outputs for any one options: Eight outputs designated to one channel (1x8), Four outputs designated to channel A, four outputs designated to channel B (dual 1x4), Eight outputs designated to the combined stream of both channels (2x8 sum)


Specifications:

  • Balanced Analog Audio Input - Connector : 3-pin Leitch audio connector
  • Balanced Analog Audio Input - Signal type : Balanced
  • Balanced Analog Audio Input - Input impedance : HiZ, >30 k Ohm
  • Balanced Analog Audio Input - Maximum input level : +28 dBu
  • Balanced Analog Audio Input - CMR range : ?20 V
  • Balanced Analog Audio Input - CMRR(common mode rejection ratio) : 90 dB @ 60 Hz @ 8 dBu
  • Balanced Analog Audio Input - Gain range : -95.5 to 31.5 dB in 0.5 dB steps (gain increment tolerance ?0.05 dB)
  • Balanced Analog Audio Input - Gain trim : Local front adjust potentiometers provide ?1.5 dB to set exact unity
  • Balanced Analog Audio Output - Connector : 3-pin Leitch audio connector
  • Balanced Analog Audio Output - Signal type : Balanced
  • Balanced Analog Audio Output - Output impedance : 66 ohm
  • Balanced Analog Audio Output - Maximum output level : +28 dBu
  • Performance - SNR : >90 dB @ unity gain, 20 Hz to 20 kHz relative to +8 dBu signal, unweighted
  • Performance - Frequency response : ?0.05 dB 20 Hz to 20 kHz relative to 1 kHz @ unity gain
  • Performance - THD : <0.02% 20 Hz to 20 kHz @ 24 dBu
  • Performance - IMD : <0.02%, SMPTE @ +18 dBu
  • Performance - Crosstalk : >85 dB isolation, 20 Hz to 20 kHz
  • Performance - Output isolation : >70 dB, 20 Hz to 20 kHz
  • Channel State Monitoring : Inactive state if Channel <-40 dBu for 5 sec, Active state if Channel >-40 dBu for 5 sec
  • Channel Overload Monitoring : Overload condition if Channel >23.5 dBu for 1 sec
  • Power Consumption : 3 W

 

 

 

Related Products

Back to Top