Menu
Your Cart

All stuff which we are selling is used.

KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs

KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
Out Of Stock
KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs
$660.00
  • Stock: Out Of Stock
  • Code: BS17028
  • Model: GPI 32

KLOTZ GPI 32 general purpose interface 32 inputs 32 outputs for VADIS 

 

The general purpose interface  is a control signal interface between the Matrix frame and external equipment.

 

The GPI has 2 functions:

 

• Control of external equipment by the Klootz Matrix frame

 

• Control of the Klotz Matrix frame by external equipment

 

The GPI and the Klotz Matrix frame are connected via Ethernet.

 

 

 

The GPI’s 32 control signal inputs are designed as galvanically isolated optocoupler inputs for the input voltages 5 V and 24 V. The external control signal lines are connected to the GPI input via 4 37-pin D-SUB female panel connectors on the back of the GPI.

 

The 32 control signal outputs are floating relay contacts. The external control signal lines are connected to the GPI output via 2 37-pin D-SUB male panel connectors on the back of the GPI.

 

 

 

The general purpose interface (GPI) C GPI32E is a control signal interface between the VARIZONE Matrix frame and external equipment.The GPI has 2 functions:• Control of external equipment by the VARIZONE Matrix frame• Control of the VARIZONE Matrix frame by external equipmentThe GPI and the VARIZONE Matrix frame are connected via Ethernet. The GPI’s 32 control signal inputs are designed as galvanically isolated optocoupler inputs for the input voltages 5 V and 24 V. The external control signal lines are connected to the GPI input via 4 37-pin D-SUB female panel connectors on the back of the GPI.The 32 control signal outputs are floating relay contacts. The external control signal lines are connected to the GPI output via 2 37-pin D-SUB male panel connectors on the back of the GPI.The configuration of the control signal in- and outputs of the GPI is made in the VARIZONE software to customer‘s specifications. This also includes the config-uration of the trigger characteristics of the control signals. So input signals can be defined either edge positive or edge negative. Output signals can be latched or pulsed with a length between 110 ms and 800 ms