HARRIS HSE6800+ 3G/HD/SD/ASI Serial Digital Video DistributionAmplifiers Single 1x8

Harris HSE6800+ are SD/HD serial digital video distribution amplifiers in the 6800+ family:

The HSE6800+ is an SD/HD serial digital video distribution amplifier with cable equalizing and reclocking.

Both distribution amplifiers feature high video performance, low cost, remote control, and diagnostic capability in our control system.

You can set up, control, and monitor the HSD/HSE6800+ either locally via a card-edge jumper or remotely on a PC. For remote control, you can use either a serial RS-232 or optional ICE6800+ Ethernet connection.

HSE6800+ features include the following:

One input, eight outputs for the dual slot back module; or one input, four outputs for the single slot back module

Input signal presence detect

Automatic cable equalization

Alarm output

Automatic/manual reclock rate setting at 143 Mb/s, 177 Mb/s (manual only), 270 Mb/s SDI and ASI, 360 Mb/s, 540 Mb/s; and 1.485 Gb/s (HSE6800+ only)

Reclocking status

Automatic/enforced bypass