Menu
Your Cart

All stuff which we are selling is used.

Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots

Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Out Of Stock
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
Harris DA-H6802+ 1×8 3G/HD-SDI/SDSDI Distribution Amplifier 2 slots
$450.00
  • Stock: Out Of Stock
  • Code: BS17646
  • Model: DA-H6802+

The product is two card solution onto a single backplane slot for the Flashlink FR202 frame or Flashcase II. It is available with either DIN 1.0/2.3 or HD-BNC connectors. The two cards operate separately and the backplane has no active components, allowing one card to be replaced without affecting the other card.

All outputs are non-inverting, supporting DVB-ASI. Each output also detects if its port is unconnected and turns off automatically. This minimizes the power consumption in operation.

The Flashlink element manager Multicon Gyda enables web and SNMP interface for monitoring card and signal status.

This product cannot be used in the Flashlink FR-2RU-10-2 chassis or the N-box, but a single card solution with BNC
ports is available.

Technical Details

  • Ultra long cable reach
    • 90m 3G-SDI
    • 180m HD-SDI
    • 325m SD-SDI
  • Dual 1×8 distribution amplifier
  • 16 non-inverting outputs
  • Up to 160 outputs in 2RU
  • Cable detection on outputs