Comtech EF Data CDM-570L L-Band satellite Modem with








- Stock: 10
- Code: BS20289
- Model: CDM-570L
Comtech EF Data CDM-570L L-Band satellite Modem is Ideal for optimizing satellite communications, the CDM-570 and the CDM-570L are designed to meet the needs of low-cost terminals with 70/140 MHz interfaces to conventional Up & Down Converters, or L-Band interfaces to Low Noise Block Converters (LNBs) and Block Up Converters (BUCs).
The modems include synchronous EIA-530/-422, V.35, EIA-232 and G.703 interfaces. In addition, an optional Internet Protocol (IP) Module is available with a 10/100 Base-T Ethernet interface for LAN and network applications.
The architecture is firmware and FPGA-based, and the internal Flash memory allows easy updating via the serial port, or front panel USB port. The modem offers exceptional flexibility and cost-effective performance in a 1RU enclosure. Comtech EF Data CDM-570L L-Band satellite Modem
Technical Details
- CDM-570: 50 to 90 or 100 to 180 MHz IF range CDM-570L: 950
to 1950 MHz IF range
- Fast acquisition
demodulator (± 32 kHz acquisition range, 64 kbps, Rate 1/2 QPSK: 150 ms
average)
- Modulation types:
BPSK, QPSK, OQPSK, 8-PSK, 8-QAM, 16-QAM • Data rate range from 2.4 kbps to 5 Mbps
- Forward Error Correction choices include Turbo Product
Coding, Viterbi, Reed-Solomon, and TCM
- Automatic Uplink
Power Control (AUPC)
- Embedded Distant-end Monitor and Control (EDMAC)
- Asymmetric Loop
Timing
- Built-in 1:1 redundancy controller (Y-cables for data,
simple and inexpensive external module for IF and RF)
- CDM-570: FSK communications to CSAT-5060 or KST-2000A
- CDM-570L: Operation with LNB and BUC
- CDM-570L: BUC 10 MHz reference and FSK communications and
optional BUC power supplies
- CDM-570L: LNB Power Supply and 10 MHz reference
- Backwards
compatible with the CDM-500/CDM-550, CDM-550T and, CDM-600 and CDM-600L
- Interoperable with
SDM-300A, SDM-300L3
- Ethernet M&C
interface with Web browser, SNMP and Telnet
- IP Module option
- Vipersat Management System (VMS)
- 1:1 and 1:10 redundancy switches available