Clear Com ICS-1008 16-key Non-Display Pushbutton Panel








- Stock: 2
- Code: BS17593
- Model: ICS-1008
The ICS-1018 is 1-RU digital intercom stations for use with Matrix Plus 3 digital intercom systems. The ICS-1016 features 32 pushbutton keys that can be programmed for talk, listen, or talk-with-listen. The ICS-1008 has 16 keys. A full-range, integral speaker with volume control permits monitoring of any selected listen keys. Pushbutton switches for speaker on/off, mic on/off, call/listen level, and listen level up and down are provided. Gain trim, sidetone, and speaker-setup controls are accessible on the rear panel. These stations give the user an excellent balance of high performance and value. They are ideal for use with the MicroMatrix digital intercom system and with the larger Compact 72 and System 200 intercom frames.
TALK AND LISTEN KEYS
Responsive pushbutton keys feature back-lit LED's that track the status of each key. The keys are momentary/latching, depending on whether they are pushed and held or quickly tapped, and may be individually programmed for momentary-only operation. A key illuminates red for talk or talk-with-listen, and yellow for listen. Keys may be programmed for other functions besides talk and listen, allowing onetouch telephone dialing, IFB interrupt, control over relays, and activation of interfaces to other communications systems. When a key is programmed with a particular destination label, it lights at a lower intensity with the appropriate color. When a key is active, it illuminates with higher intensity. Various flash rates are used to indicate different tally and programming states, such as call-waiting and device-active tallies.
Technical Details
LINE INPUT/OUTPUT
Type: Transformer Balanced
Input Impedance: 8K Ohms Bridging
Output Impedance: 150 Ohms
Level: 0 dBv nominal Freq.
Resp.: 50 Hz - 15 kHz, +/-2 dB
PANEL MICROPHONE INPUT
Type: Electret with proprietary phone jack
Input Level: -40 dBv
Gain Adjustment Range: +/-5 dB (software)
Impedance: 200 Ohms
HEADSET MICROPHONE INPUT
Type: Dynamic
Input Level: -55 dBv
Gain Adjustment Range: +/-5 dB (software)
Impedance: 200 Ohms
HEADPHONE OUTPUTS
Impedance: 50 - 600 Ohms
Power: 1/2 Watt into 50 Ohms
FRONT PANEL CONTROLS AND
CONNECTORS
Selector Keys: 32
Keypad Keys: 6
Answer Back Selector Key: 1
Volume Controls: intercom
Headset Connector: XLR-4M
Panel Mic Connector: Locking 1/4" phone jack
REAR PANEL CONNECTORS
Miscellaneous:
To Matrix: RJ-45
Expansion Option: DB-9F
TEMPERATURE
Operating: 0º - 50º C (32º - 125º F)
Humidity : 20% to 90%, non-condensing
POWER
In-Line Power Supply, with 3-pin EIA connector,
UL approved power supply
Voltage: 90 - 250 VAC, 50 - 60 Hz, 50 VA max.
DIMENSIONS
1.75" H x 19" W x 6.75" D (89 x 483 x 172 mm)
WEIGHT
4.0 lbs.