Broadcast up down cross converter for HD/SD

Technical Details

 MECHANICAL

Standard Vision card 96mm x 303mm (96mm x 325mm including finger pull)

Weight: 180g (with no piggybacks); 220g (with two piggybacks)

Power consumption: 10 Watts (SYNNER-VF); 1.6 Watts (3G-AIP2); 1.5 Watts (3G-AOP2);

1 Watt (DIOP4); 0.6 Watts (FIP-VF and FOP-VF);

1 Watt (FIO-VF)

VIDEO INPUT

One 3Gb/s or HD or SD input

When using FIP-VF or FIO-VF fiber input options allows selection between one optical and one electrical input

270Mb/s or 1.5Gb/s or 3Gb/s serial compliant to SMPTE 259, SMPTE 292-1 and SMPTE 424/425-A The video formats supported are 625, 525, 720p50, 720p59.94, 1080PsF23.98, 1080PsF24, 1080i50, 1080i59.94, 1080p50 and 1080p59.94 3Gb/s cable equalization up to 100m using Belden 1694A. HD cable equalization up to 140m with Belden 1694A or equivalent (approx. 100mwith Belden 8281). SD cable equalization >250m Belden 8281 or equivalent

Automatic de-embedding to SMPTE 272 or SMPTE 299-1

INTEGRATED FIBRE OPTIONS

SYNNER-VF can be given integrated fiber connectivity by fitting the FIP-VF fiber input option, FOP-VF fiber output option or FIO-VF fiber input and output option. The chosen option should be fitted at the factory

To access the optical inputs or outputs a VR12 (for 110 ohm AES or analogue audio) or VR13 (for

75 ohm AES) frame rear module must be used FIP-VF, FOP-VF and FIO-VF meet the SMPTE

297-2006 short-haul specification, allowing operation with single-mode and multi-mode fiber Connector type: LC

FIP-VF or FIO-VF input:

Optical wavelength: 1260-1620nm

Input level maximum: -1dBm

Input level minimum: Typical -20dBm (-18dBm 3Gb/s pathological)

FOP-VF or FIO-VF output:

Optical power: Max 0.0dBm, min -5.0dBm

Fiber pigtail: Single-mode 9/125uM

Optical wavelength: 1290-1330nm (1310 typical)

Extinction ratio: 7.5dB

Laser safety classification: Class 1 FDA and IEC60825-1 Laser Safety compliant

Loss of input will automatically disable the laser output. The output can also be manually enabled and disabled

CWDM laser can be fitted on request. The 18 output wavelengths defined by the ITU are 1271, 1291, 1311, 1331, 1351, 1371, 1391, 1411, 1431, 1451, 1471, 1491, 1511, 1531, 1551, 1571, 1591 and 1611nm. For CWDM, order the FOP-CWDM-VF and specify the wavelength required

VIDEO OUTPUTS

Up to three 3Gb/s, HD or SD outputs depending on audio impedance and frame rear module used

Using single slot VR02 rear module (110 ohm AES or analogue audio): Three BNC video outputs

Using single slot VR12 (110 ohm AES or analogue audio):

•  With FIP-VF fibre input option: Two BNC video outputs

•  With FOP-VF fibre output option: Three video outputs (one on fibre and two on BNC)

•  With FIO-VF fibre input and output option: Three video outputs (one on fibre and two on BNC)

Using double slot VR13 (75 ohm AES):

•  With no fibre option: Three BNC video outputs

•  With FIP-VF fibre input option: Three BNC video outputs

•  With FOP-VF fibre output option: Four video outputs (one on fibre and three on BNC)

•  With FIO-VF fibre input and output option: Four video outputs (one on fibre and three on BNC)

Serial output: 270Mb/s or 1.5Gb/s or 3Gb/s serial compliant to SMPTE 259, SMPTE 292-1 and SMPTE 424/425-A. Output follows the input format

 Audio is embedded to SMPTE 272 or SMPTE 299-1