AXON HFS11 HD/SD frame synchronizer with audio embedding for 2 groups BPH01 back








- Stock: 2
- Code: BS20247
- Model: HFS11
AXON HFS11 HD/SD frame synchronizer with audio embedding for 2 groups BPH01 back
The AXON HFS11 HD/SD frame synchronizer is an HD/SD frame synchronizer/video delay/autophaser module, video proc amp. In addition, the HFS11 has a 2 group embedding function. The synchronizer function can be used to synchronize a non-synchronous signal or to compensate a delay. The HFS11 has full transparent blanking, both horizontally and vertically.
The video reference is connected through the central genlock input of the SFR18, SFR08 or SFR04 frames and is compatible with a bi-level and tri-level sync. The line synchronizer function corrects timing errors (hops) that occur due to switching in a router. In addition the HFS11 can be used as a delay line, giving up to 1 frame delay. A video reference is not required in this case, as the output clock frequency is derived from the input video clock.
Technical Details
- One reclocked output
- Two processed outputs
- I/O delay measurement
- Switch positioning measurement (in auto phase mode)
- H and V delay offset adjustment with respect to input or reference
- ANC blanking of H, V or H+V
- Test pattern (color bar/sweep)
- OSD ident label with maximum 10 characters (for set-up purposes)
- Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
- Optional 1 fiber input (replacing 1 SDI input) or 1 fiber output (replacing 1 SDI output) on I/O panel