AXON HED100 HD SD embedded domain Dolby E to Dolby Digital (plus) transcoder with audio shuffler with bph18d back








- Stock: 1
- Code: BS20258
- Model: HED100
AXON HED100 HD SD embedded domain Dolby E to Dolby Digital (plus) transcoder with audio shuffler with bph18d back
The AXON HED100 HD SD are embedded domain Dolby E to Dolby Digital or Dolby Digital Plus transcoders. Simultaneous encoding of 5.1+2.0 or 4 individual stereo channels (languages) to 4 Dolby Digital (Plus) 2.0 streams is possible.
The new Quad Speed audio bus allows for implementation of ‘in between’ audio processing. This means that we can stream the decoded Dolby E audio to a Quad Speed Audio ADD-ON card like the DLA44 or DLA42, process this audio and send it back to the G/HED100 for encoding into Dolby Digital or Dolby Digital plus. The ADD-ON card does not need a connector panel and all audio routing is performed inside the Synapse frame by just placing these cards in adjacent slots.
The HED100 can be future upgraded to GED100. This allows for staged implementation of HD infrastructures and spread the cost over multiple budget years.
Technical Details
- Offset video delay adjustable between 0 and 1000ms
- Quad Speed Audio ADD-ON bus for bidirectional audio processing
- 2 SDI + embedded audio outputs
- 7 presets that configure all 16 input channels at once. controlled by GPI or ACP (Cortex)
- Append and overwrite modes
- Audio level and phase control
- Audio offset delay up to 5000 ms
- Silence detection with threshold (-100 to -20dBFS) and time control (1 to 255 sec)
- Transparent for ATC time code RP188, RP196, RP215
- Locks to Tri-level, Bi-level syncs or input
- Full control and status monitoring through the front panel of the SFR04/SFR08/SFR18 frame and the Ethernet port (ACP)
- Optional relay bypass (BHX18D)