-64x64w.jpg "Trilogy")
AXIA Analog XNode
- Stock: Out Of Stock
- Code: BS16953
- Model: Analog xNode
The Analog xNode has 8 mono or 4 stereo balanced line-level inputs and 8 mono or 4 stereo balanced line-level outputs, on RJ-45 and DB-25 connectors. It can also accommodate 5.1 Surround inputs and outputs, each with an associated discrete Stereo mix. Each input is switchable to accommodate either consumer-level -10dBv or professional level +4dBu sources. The short-circuit protected outputs can deliver up to +24dBu before clipping. Telos Alliance uses only studio-grade A/D/A converters and low-noise components, so that each Analog node provides superior audio performance for high-end studio use.
The xNode lightweight, half-rack, high-performance IP-Audio interface from Telos Alliance is loaded with
advanced features and capabilities. One-button configuration takes a new xNode from out-of-the-box to
on-the-air in under one minute. They’re fanless, which means they’re noiseless too. Versatile mounting
options let you deploy two xNodes in just 1RU of rack space, or on ceilings, walls, and under counters
with an available wall-mount kit. xNodes have studio-grade audio performance specs.
Technical Details
Microphone Preamplifiers
• Source Impedance: 150 Ohms
• Input Impedance: 4k Ohms minimum, balanced
• Nominal Level Range: Adjustable, -75 dBu to -20 dBu
• Input Headroom: >20 dB above nominal input
• Phantom power: +48VDC, switchable
Analog Line Inputs
• Input Impedance: >40k Ohms, balanced
• Nominal Input Range: Selectable, +4 dBu or -10dBv
• Input Headroom: 20 dB above nominal input
Analog Line Outputs
• Output Source Impedance: <50 Ohms balanced
• Output Load Impedance: 600 Ohms, minimum
• Nominal Output Level: +4 dBu
• Maximum Output Level: +24 dBu
Digital Audio Inputs and Outputs
• Reference Level: +4 dBu (-20 dB FSD)
• Impedance: 110 Ohm, balanced
• Signal Format: AES3 (AES/EBU)
• AES3 Input Compliance: 24-bit with sample rate conversion
• AES3 Output Compliance: 24-bit
• Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm
• Internal Sampling Rate: 48 kHz
• Input Sample Rate: 32 kHz to 192kHz
• Output Sample Rate: 44.1 kHz or 48kHz
• A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling • D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling
Online