AJA D10CEA SDI to Analog Audio/Video with patch cable












- Stock: 4
- Code: BS17961
- Model: D10CEA
The AJA D10CE converts SD-SDI video with embedded audio to 10-bit component or composite analog video and 4 channel balanced analog audio. The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU N10), RGB, 1 composite or 1 Y/C (S-Video).
The 4 ch analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio output channels can be selected as group 1-4 from SMPTE embedded audio. Audio level has 4 settings. Audio and video output connections are available on a 25 pin "D" subminiature connector – a breakout cable is supplied. All video/audio configuration is done by external dipswitch selection. This versatile, lowcost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.
AJA D10CEA SDI to Analog Audio/Video with patch cable
Technical Details
Inputs
• Pedestal
• H&V blanking
•
SD-SDI (SMPTE 259M)
w/embedded audio
• 1 x BNC
Outputs
•
Video:
•
YPbPr - SMPTE
•
Betacam
•
RGB
•
NTSC
•
PAL
•
YC (S-Video)
•
10-bits
• Audio:
• 4 Channel Balanced/Unbalanced, Video/Audio outputs on 25-pin
D connector 2 SDI Reclocked loop through, 2 x BNC
• Video, +/-.25db
to 5.5 mHz Y
• Audio, +/-.5db to 20 kHz
User Controls
•
External Dipswitch
• Video Format
• Audio group 1,2,3,4
• Audio Level,
adjustable via switch
selection: +24, +18,
+15, +12 dBu
• Full Scale Digital
Size (w x d xh)
• 5.8" x 3.1" x 1.0" (147mm x 79mm x 25mm)
Power
• +5VDC Regulated, 4 watts, power supply required, included with purchase
Environment
•
Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees
F)
• Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140
degrees F)
• Operating Relative
Humidity: 10-90% noncondensing
• Operating Altitude: <3,000 meters (<10,000 feet)